주식회사 제이티에스

Choosing uPVC Replacement Window Handles

Almost all customers agree that the upvc replacement window handles are easy to install and feel like good quality. But it's important to understand that the kind of handle you pick should be appropriate for your window.

The primary factor is the step height, which refers to the space between the nose of the handle to the base or frame. Other considerations include locking mechanisms and styles.

Replacement parts

You can buy a variety of replacement upvc handles. They are available in a variety of colours and styles so there's bound to be something that fits your existing windows. It's easy to impulse buy especially when the handle fails, so it's best to be patient and examine certain things prior to committing to purchasing a new one. First, you need to know what type of upvc handles you have and what the differences are between them. The table below lists the most commonly used handles to help you identify the one that is suitable for your upvc windows.

Espag handles are the most popular and are commonly found on modern double-glazed windows. They are typically attached to the frame using two screws that screw in from both sides.

The spindle bar in the back may be of different sizes, and can determine whether they are left-handed or right-handed. This is why it's important to measure the current handle to ensure you're ordering the correct replacement.

The arm is fixed to the frame with two bolts, much like the Espag handle. However, the handle is curved at a low angle to ensure that it doesn't scratch your blinds. This is a good option if you have blinds on your windows made of upvc and want to ensure that the handle will blend with them.

Cockspur handles are similar to Espag handles but they have a nose which closes over a wedge which sits on the frame of the window. This kind handle is found on some older wooden and Upvc windows.

Tilt and turn handles are often found on casement windows and can be operated either by turning the handle or pushing on the top of the window. This lets you open the window from inside and clean it from outside without the need to climb a ladder or step across the garden fence. They are also an excellent option for those with limited mobility. They are an excellent method to improve security and accessibility within the home.

Hints and tips

There are many different kinds of uPVC window handles, and a lot of people will need to replace them at some point. If this happens it's a good idea to be aware of a few tricks and tips that can help the job go as smoothly as it can.

Find out what kind of handle is at your home. Based on the type of handle and the locking mechanism, it may be necessary for you to replace the lock and handle. For example, if the shoot bolts (espag) and roller cams are jammed or seizing, you will need to change them, as well as the handle itself.

Thankfully, the majority uPVC handles follow industry standards and are alike. This makes replacing them an simple process. First, uPVC Replacement Window Handles remove the screw covers on the handles. They are typically pozidrive screws. Once the screw covers are removed then you'll be able to take apart the handle.

If you've got the handle split from the handle, it's a good idea to make an inventory of how much of the spindle is protruding from the base of the handle. This will enable you to determine the length of the spindle for an alternative handle. To do this, measure the amount of the square peg sticking out from the top of the handle, and use it as a reference.

This is particularly crucial for inline uPVC window handles since they are always straight and will only open from left or right, and will not operate in the middle. If you're unsure of the kind of handle you have in your home, it can be an excellent idea to borrow the handle from your neighbor's home and see how it operates to get an idea.

Another excellent method to figure out what the hand of the uPVC window handle is to simply look at how the handle moves when it is operating. Handed handles can be turned clockwise or counter-clockwise. If you're not sure then you can always ask someone else to open the window using the handle, and work out how it functions in this way.

Find the spindle's measurement.

It isn't easy to select the right replacement handle for your window because there aren't all handles that come in the same size. The spindle is what is the mechanism that locks the window. It is crucial that when you fit a new handle it is measured to the length of the spindle precisely to ensure that it fits. There are many different types of uPVC handles that operate in various ways. It is essential to know which type you have and the locking mechanism you are using.

Espag handles have a spindle that extends from the rear of the handle, and is inserted into the lock gearbox within the window frame. When you turn the handle this turns the lock within the gearbox and opens the window. They are used on uPVC windows with casement and can be locked using keys for extra security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They have an "nose", which closes over a wedge shaped striker block. They are also simple and can be locked with keys. It can be more difficult to replace these handles because they are not as popular as the espagnolette handles.

If you have a tilt and turn uPVC and you require a new handle that has a different locking system. It can open the window by tilting it, but also rotate it inwards and outwards to open it fully. It is essential to select a handle with a spindle that is at least 55mm to be able reach the window frame.

The same procedure can be used to remove and replace the uPVC handle. But, you'll need to take care when unscrewing it. It might be necessary to open the window more than usual to reach both screws that attach it to the frame. Once you have put in your new upvc window handle replacement handle and checked that it is in the proper position, upvc replacement window handles you are able to tighten the screws, and test the lock to make sure it is working properly.

Install the new handle

Once you have the correct handle replacement it can be screwed in place. It will require a screwdriver and an electric one may be a lot easier. When screwing in place it is important not to over tighten the screws, as this can cause the handle to break or warp.

The second step in installing the new handle is to put in the spindle. It is the part that runs through the handle and is responsible for operating the locking mechanism within the window. It is crucial that it is installed correctly since this will ensure the window can be opened and closed securely.

There are a variety of different kinds of uPVC window handles. They include:

Espagnolette Handles are inline handles which can be used to open tilt windows and turn them.

Cranked Espagnolette Handles - these are similar to the inline handle but feature a curved design that is useful for windows in difficult-to-access locations.

Tilt and Turn Handles - These are used on tilt and turn windows for operating the opening and closing mechanisms.

The majority of uPVC window frames are equipped with these. They are often called 'Bay windows in the UK.

If your uPVC window handle is broken, it can be extremely frustrating. There isn't any need to replace the entire uPVC windows because of a broken handle. There are a number of simple steps that can be taken to repair and replace a damaged uPVC window handle.

You can repair your broken window handle swiftly by identifying the model and determining the spindle. It is important to be patient and prioritize safety when working with windows and tools, but this is a simple task. It can be the difference between having a secure and safe home or a unsecured easily opened window! If you have any concerns or would like to speak to a specialist about replacing the handle on your window, call Bridgewater Glass. Our team is experienced and knowledgeable to help you with any problem.