주식회사 제이티에스

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they are not susceptible to rust or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the new window will usually fit inside the frame of the previous one easily. However If you have double-pane windows that are secured by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards fall on the fabric rather than on the floor where they could be trampled on and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and fix the window. This also serves as an obstacle to stop intruders from getting into your home. If the distance between the door and the window is significant, you may need to consider security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. As time passes, they may be affected by a variety of issues that include sagging. A sagging uPVC window could cause issues with light, draughts, and even security. If you find that your upvc window repairs near me window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. With a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the fit, tighten the screws to ensure that they remain in the right place.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loosen. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows are watertight and draught-proof.

upvc Window repair handles can also become loose. Most often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose upvc window repair near me handle. First, you'll need to shut the window and perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is essential to act if you get up each morning to discover mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the issue the caulking that was used up may need to be removed before a fresh layer can be put on. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

Check that any drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious situations, you may have to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely the problem is with the seal rather than the frame. Again this can easily be fixed by an uPVC window expert who can replace the glass seal and Upvc window repair restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open in a breeze it could be the hinges that are at fault. They can be easily repaired by any skilled DIYer and can be completed in just a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they can wear down over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier to do when you have a person to help hold the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or by a poor installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to give suggestions.

Regularly lubricating the hinges is essential. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, UPVC window repair such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. The hinges may also become misaligned due to wear, creating gaps between the frame and sash. If they are beyond repair, it might be required to realign them. The second is the interlock, which is located on the hinge of the window, can also become misaligned, again it is feasible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs windows made of upvc will continue to provide a great level of security and insulation for your home. However, it is important to recognise that all windows have a life span and they may reach an point at which it is more efficient to replace them than fix them. If you are having issues with your upvc windows, it is recommended to seek help from a professional immediately.